$79.95
The Device brings you our patented EMR Modulation Technology in its most compact form. Designed with an effective range of 6 square feet, a waterproof coating, plus an adhesive backing for easy application, the Device is a stick it and forget it solution. From cell phones, tablets, and headphones to computers, baby monitors, and smart cameras, achieve optimal protection and performance for all of your favorite electronics.
HOW IT WORKS
Imagine duplicating a sound or light wave, flipping it upside down, then overlapping the two waves to cancel each other out. This is called negative interference, a principle that’s used in things like noise cancelling headphones.
We Leverage This In Our Microprocessors To Cancel Out External Electromagnetic Fields And Any Radiation As Result.
The electromagnetic radiation is concentrated by being drawn to the resonator antenna attached to the LifeTune Device. The antenna draws the power of the electromagnetic field (EMF) into the microprocessor. An attenuator within the microprocessor diffracts the EMF and its energy level by creating a holographic electromagnetic wave which essentially reverses/ cancels the original energy wave emitted by the source of EMF. This works somewhat like a noise cancelling headphones that give you the best sound without the background noise.
Read 25 Peer Reviewed Studies HERE
Review the AiresTech Patents HERE
WHAT IS IT MADE OF?
1. Protective Shield – One of two protective shells on either side made of durable and resilient clear resin to shield the device from external damage.
2. Front-Facing 16S5G Microprocessor – Front-facing state of the art Aires 16S5G Microprocessor. 1,419,857 etched circular resonators in the topological circuit.
3. Absorbing layer – Infrared absorbing layer consuming the thermal emission given off by the microprocessors.
4. Resonator Antennas – One of two range maximizing resonator antennas powering the chip by harnessing the surrounding EMR.
HOW CAN I VERIFY THE PRODUCTS EFFECTIVENESS ?
This product does NOT block EMR/EMF, by doing so it would block the function of the device that emits the signal. Testing the device with an EMR/EMF meter will not show you a significant reduction of the EMF because instead of blocking the field we are modifying it, not necessarily reducing its intensity. Alternatively, you could test the effectiveness of the device by measuring the change in body’s response to an EMR emitting device with and without our product being applied to it. This could be tested using an encephalograph or other similar devices under laboratory conditions. You can read about verifying the effect HERE.
